Best Advice For Refinishing Your Wooden Entry Door in Denver Metro, CO
Whether you live in a house, a condominium, or even an apartment, you have to enter through a door just about every time you get home — or maybe your window, if that’s your preferred entry method.
If you do like a good wooden door, chances are you may have looked at it and thought about how you could improve it — and if you have thoughts on refinishing the door (assuming that it is wooden), you may be wondering how you can best get it done.
With that being the case, here is the best advice for refinishing your wooden entry door in Denver Metro, CO.
1. You Need To Remove The Door From The Hinges
There are some who would tell you that you should be able to stain your door even as it is hanging on the hinges on which it normally hangs, but this is not at all the case.
The best thing that you can do if you are trying to properly stain or refinish your door is to first remove it from its hinges — that way, you will be able to access the whole door and refinish all over without any issues.
Moreover, you will be able to make sure that the stain that you apply is applied evenly and consistently, something that’s more difficult if you try to stain while it is hanging.
2. Remove All Hardware From The Door
Another thing that is important when you are looking to refinish your wooden entry door is to make sure that you first remove the hardware that goes with the door.
This is important for a number of reasons, one of which is that it’s considerably easier to apply the stain to your door overall without things like the doorknob getting in the way.
The other major bit of information you should know is that it’s a lot easier to avoid accidentally applying stain to the hardware if you remove it first — stain goes many places, but it should not go onto the door itself.
3. Only Gently Sand The Door
When you are getting ready to stain the door, one of the preparatory steps you should take first is to sand the door such that it will be more ready for the stain that you will be applying.
The important thing to bear in mind is that you shouldn’t go too rough when you are sanding — you could damage the door in doing so.
Rather, you will need to be more than gentle when you are sanding.
4. Proper Protection Is Needed
It should come to no surprise that you need protective gear when you are working on refinishing your wooden entrance door.
You should, for example, make sure that your eyes are protected during the refinishing process — particularly when you are sanding the door.
You should also take care to wear some sort of a dust mask throughout the process as you will want to avoid any of the dust that can get brought about while you are working on refinishing your door.
5. Tack Cloth For Removing Sanding Dust
When you are in the process of sanding the wooden door in order to prepare it for being refinished, you will absolutely generate quite a lot of dust.
As much as a good shop vac will be in getting the majority of the sanding dust, there is something to be said for a good tack cloth for properly removing the rest of the sanding dust and making sure that your door will be fully ready to be refinished.
If you are concerned about the environmental impact of using a tack cloth (it is a disposable item), you can go with an alternative such as a microfiber cloth, which can be washed and reused a number of times.
Don’t settle for just any painter when you can get the attention to detail and professionalism from Imhoff Fine Residential Painting in Denver Metro, CO. Call us today to speak with one of our professional color consultants.
Related: Looking For A Painting Professional in Denver Metro, CO? Here Are Important Things To Remember
5 Tips For Using Mineral Based Paint in Denver Metro, CO
Color Ideas For Your Brick Exterior in Denver Metro, CO