5 Tips For Painting Hard To Reach Walls in Denver Metro, CO
When you are painting the interior of your home, and there are some hard to reach walls, you may be wondering what some of the better ways to get to these areas in order to paint in the most efficient manner.
With the right information, however, you should be able to make the interior paint job significantly easier for yourself and save some time at the same time — which is almost always a good thing in the world of painting.
With that being the case, here are five tips for painting hard to reach walls in Denver Metro, CO.
1. Start With The Edges
When you are painting walls in general, it is useful if you start with the edges, a technique that is generally known as cutting in.
There are numerous advantages to cutting in, including that you generally don’t have to rely on painter’s tape to make your paintwork easier, and the fact that you, therefore, do not have to spend all the time waiting for the paint near the tape to dry before removing it makes the process a bit easier.
The fact that so much of this edge work will be so high up will make the overall paintwork that much easier.
2. Choose A Ladder Or Scaffolding
In the course of reaching your hard to reach walls, one of the things that you’re going to need to do is to choose whether you’re going to choose to use a tall enough ladder or scaffolding — both have their good and bad points.
A ladder is largely good if you want a more portable solution to reaching your high up spaces on the wall, but be aware that it can get a little unsteady if you don’t set it up correctly, and it may even get to be a little uncomfortable for being up there too long.
Scaffolding, on the other hand, is good in that you can more comfortably stand on it for a longer period of time — this is good if you tend to want to take your time painting and move the paint roller slowly along the wall rather than moving more quickly.
The downside is that it is much more difficult to move to scaffold around, even if it is on wheels (which then have to be locked while in use — you don’t want to have your scaffolding roll away while you’re on top!)
3. Do Not Use Makeshift Scaffolding
As good as scaffolding is, you absolutely do not want to use scaffolding that is DIY — that is to say, the act of taking things like planks and then putting them on top of like buckets or even stacks of bricks.
Using makeshift scaffolding is a surefire way to possibly get injured, and on top of that, they are considerably more difficult to move from one part of the area being painted to another.
4. Square Edgers For High Place Cutting In
As we have mentioned above, cutting in can be a good way to start your painting project, and when you are looking to cut in a while up high, one of the easiest ways to do it is to use a tool called a square edger.
A square edger will help you cut in when you are painting the higher parts of the wall as it cuts in more easily, a good thing when you are up high.
5. Use An Extension Pole As Needed
It is notable that when you are painting the high areas of your wall or even high ceilings, it sometimes is easiest if you use an extension pole to help you reach the areas of your wall that are still hard to reach.
There are even telescoping poles that will stretch out to be as long as you need.
Don’t settle for just any painter when you can get the attention to detail and professionalism from Imhoff Fine Residential Painting in Denver Metro, CO. Call us today to speak with one of our professional color consultants.
Related: Looking For A Painting Professional in Denver Metro, CO? Here Are Important Things To Remember
5 Tips For Using Mineral Based Paint in Denver Metro, CO
Color Ideas For Your Brick Exterior in Denver Metro, CO