5 Tips For Using Mineral Based Paint in Denver Metro, CO

When you are working on improving the appearance of your home by painting, one of the challenges you will face is choosing what kind of paint you will use.

One of the paints that are available to use for painting your home (both exterior and interior) is mineral-based paint, which is made of water glass and mineral pigments.

Mineral-based paint has many fine qualities, among which is that it is water-resistant and good against things like acid rain, pollution, and mold.

With that being the case, let us look at and consider five tips for using mineral-based paint in Denver Metro, CO.

1. Shellac To Seal Knots On Wooden Surfaces

Wooden surfaces tend to have knots, at least if they are wood cut from a tree and aren’t a synthetic product made to look like wood.

Knots tend to come through to the surface and are visible, even if you use a number of coats of paint — with one possible workaround to make them no longer visible.

If you use good shellac first to seal the surface, you will note that you won’t be able to see the knots come through after a couple of coats of your mineral-based paint.

2. Use Plastic Wrap To Make Reopening Paint Much Easier

One issue that people have is that it can be a bit tricky to reopen paint once it has been opened — but there is a way that you can close the paint container and have it be not too difficult to reopen.

Use a plain piece of plastic wrap put on the container prior to putting on the lid, and you will note that you can reopen the container of paint much easier.

3. Make Sure The Surface Is Clean Before Painting

Few things get in the way of painting than having a dirty surface — depending on the material that you are painting, it’s entirely possible that you have dirt, dust, and possibly even mold or mildew on the surface. You wouldn’t want to paint over that.

The best thing you can do in preparation for a painting project is to make sure that the surface you are painting is properly cleaned with a mixture of cleaning products and the appropriate brush or cloth so that you can get the dirt or grime off of that which is being painted.

Once you have cleaned the surface, you will have to make sure that it is dry before you continue with your painting project.

4. Too Much Paint On Your Brush Is A Bad Thing

When it comes to loading up your paintbrush during the painting process, too much paint is not a good thing.

If, while you are painting, you see a certain texture on the surface that you are painting that almost looks like little valleys, it is a good sign that you have too much paint on your paintbrush.

If you have the right amount of paint on your paintbrush, you will find that ultimately you will be using fewer brush strokes to cover the surface that you are looking to paint.

5. Test Colors Before Committing To Them

When you’re looking to paint your home, you might think that you can choose the right color based on a color swatch that you find in the paint store — this is a bit of a misconception.

Though, of course, you can get a general idea if color is good based on the switches from the store, you won’t know how well the colors work with your home unless you test them out in the different light conditions that are present throughout the day.

The best way to know for sure is to get a small sample of the paint to take home and then to test out a small amount in an area that you can check on in different light conditions, and if you find that it is to your liking, you are set!

Don’t settle for just any painter when you can get the attention to detail and professionalism from Imhoff Fine Residential Painting in Denver Metro, CO. Call us today to speak with one of our professional color consultants.

Related: 7 Ideas For Best Ceiling Painting Practices in Denver Metro, CO
7 Tips For Painting Concrete in Denver Metro, CO
7 Things To Remember When Painting Kitchen Cabinets in Denver Metro, CO