7 Tips For Painting Concrete in Denver Metro, CO

When you have concrete on the exterior of your home, whether it be in the form of your exterior walls or concrete flooring, it can sometimes be improved with a simple paint job.

Of course, it is crucial to bear in mind that there are many ways to go about painting concrete, but there are some techniques that are much better than others.

With the right information, you can make painting concrete a task that you can conquer with relative ease.

As this is the case, here are seven tips for painting concrete in Denver Metro, CO.

1. Make Sure The Concrete Is Properly Cleaned First

When it comes to painting concrete, you’re going to have a much harder time if there is dirt or any sort of grime on the surface.

The first thing you’re going to want to do is to give it a good sweeping and then follow it up by pressure washing to remove any dirt that may be on the surface of the concrete.

The stains that may have set in, however, are going to be less of a concern as you will ultimately be able to cover the stains through the painting process.

2. Use Concrete Patch To Repair Any Sorts Of Cracks Or Surfaces That Are Not Even

When you have concrete that needs to be painted, you’re not going to want to do so before taking care of any cracks or parts of the surface that are uneven.

You can do this by applying a concrete patch paste, which you will apply and then give ample time to dry.

The upside to doing this is that it is a preventative measure against the possibility of water getting into the cracks and then ruining your paint job from underneath.

3. Seal The Concrete Before You Paint

The last thing that you want is for water to get into your concrete surface underneath the paint, and so you need to take precautions against that from happening.

The best thing you can do to prevent it from happening is to use a concrete sealant to make sure that the water does not get into it.

Some say that this is only necessary if you are painting indoor concrete and less so when you are looking to paint outdoor concrete.

4. Make Sure You Have At Least Two Consecutive Days Without Rain

When you are looking to paint concrete, the thing that could ruin everything for you is rain — it would more than rain on your parade, it would fundamentally stop the paint job from properly drying.

Since your coats of paint require up to twenty-four hours to dry, you will want at least two to three dry days so that your paint will dry in between applying each coat of paint.

5. Primer Before Paint

As with many other paint jobs, it’s fundamentally important to prime before you apply the coats of paint to the concrete.

Once you apply the coat of primer, you will want to give it time to dry.

When working outdoors, it is often recommended that you apply two coats of primer and not just one to ensure that you get the best results.

6. Make Sure You Use The Right Kind Of Paint

Not all paints are equal, of course, and you’re going to want to make sure to use the correct one, which in this case is masonry paint.

It’s best to use a high capacity roller or brush with this sort of paint.

7. Thin Coats Are Best

When you are painting your concrete surfaces, you will want to use thin coats of paint.

You may think that you should just put it on thick, but this is not the case — you will be putting on at least two and sometimes three coats of this sort paint.

Don’t settle for just any painter when you can get the attention to detail and professionalism from Imhoff Fine Residential Painting in Denver Metro, CO. Call us today to speak with one of our professional color consultants.