7 Steps to Properly Prepared Surface for Cabinet Painting in Denver Metro, CO.

When you’re looking to improve the look of your cabinets, you should be well aware that there are a number of steps that you’re going to have to take – and that’s even before you get to start applying the paint to the surface of the cabinets.

Indeed, if you want to have well-painted cabinets you have to make sure that you prepare the surface first, and with that in mind, we are going to show you the steps you will need to take to make it happen.

Let’s have a look at seven steps to properly prepared surfaces for cabinet painting in Denver Metro, CO.

1. Remove Hardware

The first thing that you’re going to need to do in order to get your surfaces properly prepared is to remove all of the hardware that is typically associated with cabinets.

Though of course, some would say you can just work your way around the hardware, it’s quite a lot easier to remove the hardware and then put it back – and you might even think of replacing the hardware with different-looking hardware while you’re at it!

2. Take Doors And Drawers Off Cabinets

The importance of removing the doors and drawers off of your cabinets cannot be understated as it helps you with surface preparation in a couple of ways.

One is that having these on will get in the way of painting – and so having them off helps you get the job done better.

Another is that it’s a lot easier to prepare to paint (and also easier to paint) these elements when they’re removed from the cabinets.

3. Degrease And Clean

A well-painted set of cabinets is one that has been cleaned first, and depending on what room you are in when you are making this happen there might be a bit of degreaser involved as well.

In any case, you want to make sure that you get all of the dirt and grime off of your cabinets as it will not do you any good to have it there – it will only make the final paintwork look unpleasant.

4. Check And Correct Surface Problems

One area that people will often neglect when they’re painting their cabinets in terms of preparation is checking to see if there are any surface issues that need to be corrected.

These can range from holes that need to be filled to cracks that need to be properly addressed — in any case, you need to make sure you look over the surface so that you don’t miss these.

5. Sand The Surface

The sanding of the surface of your cabinets is going to be the next important step, during which you will take your nice cabinets and get the surface that will be painted and get them to be more smooth.

Doing this will help get on the paint more easily and to some extent allow it to stay on better.

6. Clean Well

Once you have sanded the surface of your cabinets, you’re going to have to make sure that you properly clean it, because the sanding process is going to create quite a bit of sanding dust — and if you don’t remove it you will almost surely see it in the paint later on.

After you clean, be sure to allow time for the surfaces to fully dry and you will be on to the last step.

7. Apply Primer

The last step in preparing the surfaces of your cabinets is going to be applying a coat of primer and then allowing that primer to fully dry.

Doing this will get your cabinet surfaces as smooth as possible and also allow for the paint that you will then apply to your cabinets to adhere to the surfaces best.

Don’t settle for just any painter when you can get the attention to detail and professionalism from Imhoff Fine Residential Painting in Denver Metro, CO. Call us today to speak with one of our professional color consultants.

Related:5 Mistakes To Avoid When Painting Your Bathroom Cabinets in Denver Metro, CO
How To Know If You Should Repaint Or Replace Your Kitchen Cabinets in Denver Metro, CO
5 Tips For Choosing Paint Or Stain For Kitchen Cabinets in Denver Metro, CO