How to open a link in a new tab:

7 Mistakes To Avoid While Painting Concrete in Denver Metro, CO

When you have concrete in or outside of your house, you can come to need to paint the concrete — it can be that you have just gotten the concrete installed or you are looking to paint concrete that already is there — you must be careful with it, as errors made can be costly.

People painting concrete might treat concrete like they would any other surface, and some of the rather foolish things they do can be rather disastrous in the painting process.

With that being the case, here are seven mistakes to avoid while painting concrete in Denver Metro, CO.

1. Using The Wrong Kind Of Paint

Paint is paint is paint. Right?

Not at all — and certainly not when you are looking to paint concrete.

If you use the wrong kind of paint — using a paint meant for painting the walls of your home interior rather than a concrete surface, you may find that the paint is quite literally peeling off the concrete surface.

This will happen because a concrete surface is considerably more porous than other surfaces that get painted and, as such, cannot be painted with the same kind of paint that you will use for these other surfaces.

2. Not Cleaning The Surface First

If you’re going to be painting concrete, you have to make sure that you clean it first.

Without cleaning the concrete, you will first be painting on top of what could be dirt, mold, and more — and that’s never a good look for painted concrete.

The second issue with painting a dirty surface is that you’re not going to have a smooth surface upon which you can paint, which will lead to the paint not going on and if you had properly prepared the surface.

3. Leaving Holes And Cracks

You can have the cleanest surface imaginable, but it won’t do you too much good if you have cracks and holes.

This is the case that should be somewhat obvious, but if it is not, you will not want to paint over holes and cracks, and that absolutely will not fill said cracks.

It is better to fill the holes with a proper concrete putty before painting.

4. Not Sanding

Although some people will think about sanding as something that you only have to do when painting wooden surfaces, there is much more to sanding than just this.

Concrete, for example, you will need to use an appropriate sanding pad for sanding the concrete’s surface before your painting it.

As mentioned above, you must have a smooth surface for painting, and part of that comes in the form of sanding the surface before you paint it.

5. Not Wearing Protective Gear

Some would look at concrete painting and think that it’s not that big of a deal and that no protective gear is needed.

This is not at all the case — there are harsh chemicals that are often used in the preparation of a concrete painting job, and you aren’t going to want to go into such a job with your bare hands.

Depending on what you use to paint the concrete, you might need to use a proper face mask and gloves, and eye protection.

6. Not Considering Epoxy Garage Paint

If you really want to make a good show of painting concrete, you should consider using epoxy garage paint to paint your concrete surface.

Epoxy garage paint takes longer to dry, but it will look so much better in the long run.

7. Not Letting It Dry

You’re looking at a lot of time to spend waiting for things to dry — for the primer to dry as well as for paint to dry.

Not allowing these to dry is just a way for you to nearly ensure that the not yet dry coat of paint or primer could well come up on the brush or roller.

Don’t settle for just any painter when you can get the attention to detail and professionalism from Imhoff Fine Residential Painting in Denver Metro, CO. Call us today to speak with one of our professional color consultants.

Related: 7 Tips For Painting Melamine Cabinets in Denver Metro, CO
5 Mistakes To Avoid While Painting Kitchen Cabinets in Denver Metro, CO
9 Colors To Consider For Your Kitchen Cabinets in Denver Metro, CO

 

WordPress Image Lightbox