How to open a link in a new tab:

5 Painting Shortcuts To Avoid While Interior Painting in Denver Metro, CO

When you are painting the interior of your home, there are so many things that happen that are so intensely involved and so very many steps that at some point you may think about taking certain shortcuts to make the entire process take less time overall.

While there are specific painting shortcuts that are perfectly fine, there are some that are toxic and will haunt your paintwork for years to come after you are done, and you have to avoid.

With that being the case, let us now look at and discuss five painting shortcuts to avoid while interior painting in Denver Metro, CO.

1. Skipping The Cleaning Phase

Some people will look at a painting project and think there’s no point in cleaning the wall prior to painting it because the paint is just going to go on top of it, so nobody is going to see all that dirt and dust.

What these very people don’t realize is that you shouldn’t paint on top of dirt if you expect to have a paint job that is going to last long — and the reason for this is fairly simple.

When you are painting, the surface that you are painting should be as smooth as possible, and the presence of dirt or dust or anything else that gathers up on the wall or other surfaces that need to be painted will prevent that.

2. Thinking One Thick Coat Will Suffice

When people paint their interior, usually the way to go is to put on a coat of primer followed by two coats of paint of your desired color.

The problem comes when people think that it would be sufficient to just paint on one very thick coat of paint rather than two standard coats of paint.

This is, of course, one of the worst things that you can do — a thick coat of paint is not only not the same as two coats of paint, but it is also considerably worse in every manner imaginable.

Thick coats of paint will just run badly and will take a long time to dry.

3. Not Sanding First

One of the most important things you can do to ensure a good paint job, as mentioned above, is to make sure that your surface is appropriately smooth.

Another way to get this to be the case is to sand at the very least before you apply the primer layer, which is another way to get that smooth surface.

Some will say that you should sand a few times — once before you apply a coat of primer, a gentle sanding after you use that coat of primer, and once after you paint the first coat of paint.

4. Not Waiting For Dry Time

After you put on a coat of primer, you need to allow it to dry before you apply the first coat of paint and after you apply that first coat of paint, you will also need to wait for that coat of paint to dry before you apply the second coat of paint.

If you don’t allow time for these coats to dry, you will firstly risk the possibility that your paint will take a lot longer to dry in the long run, which is not suitable for anyone.

More likely is the possibility that the partially dried paint will come up as you are painting the next coat of paint, and that will fundamentally ruin the paint job that you are doing, meaning that you will have to start all over again.

5. Not Stirring The Paint

The best way to have a uniform paint color is by thoroughly mixing or stirring the paint.

By not mixing the paint as you paint, you are looking at a paint job that is going to have a variety of different color tints depending on when you paint.

Don’t settle for just any painter when you can get the attention to detail and professionalism from Imhoff Fine Residential Painting in Denver Metro, CO. Call us today to speak with one of our professional color consultants.

Related: 7 Things You Should Know About Exterior Painting in Denver Metro, CO
How To Prepare For Exterior Painting in Denver Metro, CO
5 Ways To Improve Your Curb Appeal in Denver Metro, CO

WordPress Image Lightbox