Deck Staining And Maintenance Tips For The Spring in Denver Metro, CO

Your deck can be one of the nicest parts of the outdoor area of your home – a place where you can enjoy time with friends and family, whether you’re just having a nice lay about getting a tan or grilling something for dinner.

However, you should know that if you want your deck to look good over the long run, you can’t just have it made and then do nothing to keep it looking nice after you have it properly stained.

WIth both staining and maintenance, it’s good to approach it with care – for doing them well will allow you to have the deck for a long time to come.

Let’s look at some deck staining and maintenance tips for the Spring in Denver Metro, CO

1. Clean Before You Start

One thing you’re going to absolutely need to do before you start with your deck staining project is to make sure that the deck that is to be stained is as clean as possible.

This means that you are going to have to properly clean the surface of the deck being stained, but just as importantly you should remove any and all loose debris that may have come onto the deck — leaves, branches, and that sort of thing.

If you ultimately must clean the deck in a manner that gets it wet or even moist at all, you’re going to have to allow time to pass before you move on to the next step in the staining process.

2. Test Stains Before Committing To Them

In looking to stain your deck, you may think that you have the best idea of how it is going to look based purely on a printed slip of paper, but this is not at all the case.

Indeed, your best bet for having a stain that is going to look exactly how you’re going to want it to look involves getting small samples of the stain as well as wood that is like that which makes up your deck – applying this stain to the wood will let you have a good idea of how the stain will really look.

3. Be On The Lookout For Damage

In looking to keep your deck looking good, you should keep an eye out for damage that might have occurred to it before it gets worse and makes it so that you have to do more complicated forms of repair later on.

The ways that a deck can get damaged are quite numerous, but they could be anything from something falling onto the deck during normal use to normal wood rot that can happen over time to even a good solid branch landing on the deck and causing a little damage that might not go noticed unless you look for it.

If it does turn out that there is sufficient damage that a whole deck plank needs to be replaced, you should be sure to get a piece of wood that matches the kind of wood that originally made up the deck.

4. Sand Before You Stain

Lastly, you should know that in an effort to make your deck look better, you should properly sand the surface that is going to be stained well before you apply the first coat of stain.

The reason that this is as important as it is comes from the fact that when you have a smoother surface, it’s considerably easier to apply the stain – and in a sense, the stain is also taken by the deck better, as it were.

It’s key that you should clean the sanding dust from the area before you stain – you wouldn’t want dust mixed in with the stain sticking to your deck.

Don’t settle for just any painter when you can get the attention to detail and professionalism from Imhoff Fine Residential Painting in Denver Metro, CO. Call us today to speak with one of our professional color consultants.

Related: 5 Ways To Match Exterior Colors When Painting in Denver Metro, CO
Refinishing Your Staircase to Match Your Hardwood Floors
5 Uses for a Finished Basement in Denver Metro, CO.


WordPress Image Lightbox