by dybvirtual | Mar 29, 2021 | Uncategorized
5 Tips For Laminating Furniture in Denver Metro, CO
The process of laminating furniture is one in which you take plywood and make it into really spectacular looking furniture, or when you take your average countertop and make it into one that is both resistant to water along with being durable.
The work that you’re going to have to put into laminating your furniture might seem like it will be quite difficult but you are going to find that it will be well worth it given the results that you’re going to get from it.
Let’s now look at and consider five tips for laminating furniture in Denver Metro, CO.
1. Be Prepared With The Right Supplies
There are many essentials that you’re going to need in order to properly laminate furniture, and if you don’t have just about all of them, it’s going to be considerably more difficult.
These are going to be things like a pressure roller (more on this later), safety equipment, contact cement, sandpaper, a router, a table saw, and a screwdriver for helping you properly open up your glue.
The good thing about having all of your equipment handy at the beginning of the project is that you are going to know that you will be best prepared to get the job going and that you won’t have to pause the job midway to go to the store and get supplies.
This is why it is important to plan out the full laminating project from beginning to end, so you’ll know that you have everything that you need.
2. Have All Of Your Safety Gear
Some of the most important bits of equipment fall under the category of safety equipment, namely the equipment that you’re going to need in order to protect yourself during the process of applying the laminate to your furniture.
These will be things like eye protection as well as earplugs, and ideally, a way to have some sort of eyewash in the unlikely occurrence that the eye protection is not enough and you get some dust or the like near your eyes.
3. Take Care When Cutting Laminate
Before you’re going to be applying the laminate to your furniture, you’re going to need to cut the laminate first so that it is the right shape for your furniture.
In cutting the laminate, you are going to need to make use of some sort of table saw, and this will be one place in which the protective ear equipment will come in really handy.
You’ll also want to employ the old adage about measuring more than you cut because it is far better to measure something a few times than to have to throw out some laminate because you did not measure it correctly.
4. Removing Misplaced Glue
When you are applying the glue to the laminate, there’s always the possibility that you’re going to get glue places where you do not want it to be — and if that does happen to be the case, you don’t have to think that the end of the world is coming.
The good news is that if you happen to get glue in places where it does not belong, you can use an acetone solution to remove the glue.
5. Pressure Rolling
Lastly, please be advised that the best thing that you can do in terms of making sure that your laminate furniture looks as good as possible is to apply some pressure rolling to the surface.
What this accomplishes is making sure that the laminate has been properly attached to the surface of the furniture, giving it the appearance of furniture that really has that texture and surface all the way through, so to speak.
Don’t settle for just any painter when you can get the attention to detail and professionalism from Imhoff Fine Residential Painting in Denver Metro, CO. Call us today to speak with one of our professional color consultants.
Related: 7 Colors To Paint Your Stucco Exterior in Denver Metro, CO
7 Exterior Paint Problems And How To Fix Them in Denver Metro, CO
5 Things To Know When Inspecting Exterior Paint Work in Denver Metro, CO
by dybvirtual | Mar 25, 2021 | Exterior Home Painting
7 Exterior Power Washing Mistakes To Avoid in Denver Metro, CO
When you have some cleaning to do on the exterior of your home, there are many ways and techniques that you can use to make it happen but some are considerably more efficient than others.
With power washing being one of the best ways to clean your home exterior, it’s noteworthy that there are also ways to err in the process and possibly cause extreme damage to your property or worse… injury to yourself or others.
Let’s now look at seven exterior power washing mistakes to avoid in Denver Metro, CO.
1. Leaving Your Plants Unprotected
Your plants are sensitive, especially to things such as water comes out at a tremendous amount of pressure, as well as some of the cleaners that are often used in power washing.
Instead of power washing with your plants unprotected (which may lead to their getting damaged or possibly destroyed), make the time to cover your plants during the power washing process — after gently sprinkling the plants with some water to keep them moist — with a bit of plastic covering.
This will ensure that the plants are kept okay during the washing process.
2. Too Much Pressure Applied
You may be well aware of the fact that the way that power washers work is by shooting out water with a greater pressure such that it is able to clean surfaces quite well with considerably less water used.
However, when you are cleaning there are different pressures which you can set your washer and there are some which will be just too strong for certain surfaces.
Particularly strong streams can even punch holes in the surfaces you try to wash, so it is worth starting with a lower pressure before moving on to higher pressures.
3. Trying To Clean Your Tile Roof
In the world of power washing, one major mistake that people make in starting out is to think that just about anything can be cleaned with their power washer.
This is often not the case as can be demonstrated by the many tile roofs that are damaged by the use of pressure washing — it seems like a good idea in principles but too often, a little too much pressure is used and tiles are blown entirely off the roof.
The better thing to do is to use a less powerful washer for the roof, perhaps even a simple garden hose — this will not damage your roof the way a power washer can.
4. Painted Surfaces Care
If you are considering washing a painted surface, it’s worth noting how long it has been since the surface was painted — and if it was painted a while ago and has seen a lot of sun, reconsider using pressure washing on it.
The issue with washing older painted surfaces is that you can loosen or remove paint entirely if it has been there long enough or has had enough exposure to the sun.
5. Starting From The Bottom
Another mistake that is commonly made is in cleaning homes from the bottom rather than starting from the top.
When you wash the top of your home, the dirt pretty much has nowhere to go but down… and if you’ve already washed the bottom of your home, you’re just going to be getting it dirty all over again.
6. Not Using Any Detergent
Though your power washer is going to do a lot of good just through the pressure that it uses, but making good use of detergent is an important part of the cleaning process.
With a good detergent, you can really get some of the grime off of the surfaces, and you can then rinse off with plain water.
7. Using Hot Water
Lastly please make sure that you do not even consider using hot water with your home pressure washer — for even though it is a common practice in commercial cleaning, it’s not something you should do with home cleaning.
Hot water in home cleaning can damage your equipment, quite possibly, or the surfaces that you are looking to clean — better to stay safe with colder water.
Don’t settle for just any painter when you can get the attention to detail and professionalism from Imhoff Fine Residential Painting in Denver Metro, CO. Call us today to speak with one of our professional color consultants.
Related: 7 Colors To Paint Your Stucco Exterior in Denver Metro, CO
7 Exterior Paint Problems And How To Fix Them in Denver Metro, CO
5 Things To Know When Inspecting Exterior Paint Work in Denver Metro, CO
by dybvirtual | Mar 21, 2021 | Interior Painting
7 Accent Wall Painting Tips in Denver Metro, CO
In remodeling your home, you may well know that the act of painting the walls transforms the space quite radically and that it can make a rather drab looking room a lot nicer.
Though this is well and good, the truth is that sometimes you just don’t have the time or energy to paint an entire room — but if you can paint one wall a different color and therefore differentiate it from the other walls, you will be creating an accent wall and this can also make a room look so much nicer.
Let’s now look at seven accent wall painting tips in Denver Metro, CO.
1. Cleaning Before Painting
It’s fundamentally important when you’re about to paint a wall that the wall has to be clean before you paint it.
Moreover, you’re going to want to paint the area surrounding the wall that you are going to paint — and then make sure to lay down a good drop cloth in the area near the wall being painted so that you don’t get paint drips on the floor.
The reasons for this are many but you should certainly make an effort to clean and then to allow time for it to dry.
2. Using The Right Paint
There are so many paints from which you’re going to be able to choose when you’re painting your accent wall, but not all of them are going to be equally suitable.
Naturally, you are going to know not to use an exterior paint but are you aware of the different kinds of gloss that you can get with paint and what these different glosses mean in terms of use?
Glossier paint is easier to clean, for example, but not everyone likes the look of a glossy paint — so you really have to check out the balance of pros and cons based on what your needs are and what kind of traffic you can expect for the room.
3. Choosing The Best Colors
Since you’re going to be using this accent wall to be of a color that is not the same as the other walls, you should choose a color or colors that have some relation to the color or colors of the other walls.
This is to say, the two colors or color combinations should not clash but rather be a good contrast.
4. Sanding Before Painting
There are a few things that are key to doing well when you’re painting a surface, and one of them is to make sure that your surface is smooth.
To do this, you’re going to want to take steps such as making good use of primer (more on this later) and also sanding the surface that is going to be painted.
The good thing about sanding is that it prepares the surface for the paintwork ahead — and you just have to remember to also clean the sanding dust off of the said surface.
5. Using Primer Properly
As mentioned above, it’s a good idea to properly apply primer to the surface that is going to be painted.
The reasons for this are many, but suffice it to say that paint adheres to a primed surface much better than an unprimed surface.
6. Two Colors Can Be Used
Though this will be an accent wall and as such you could come to think that you can only use one color, the truth is that you can use multiple colors.
There are numerous ways you can use more than one color, such as stripes and even other patterns — but it’s really all about how it looks nicest to you.
7. Let The Paint Dry
Lastly, make sure that you allow the paint to dry after you paint each coat — and to also allow time for your primer to dry.
One big mistake that people make is to paint soon after painting one coat, and this can end up in a messy disaster!
Don’t settle for just any painter when you can get the attention to detail and professionalism from Imhoff Fine Residential Painting in Denver Metro, CO. Call us today to speak with one of our professional color consultants.
Related: 7 Colors To Paint Your Stucco Exterior in Denver Metro, CO
7 Exterior Paint Problems And How To Fix Them in Denver Metro, CO
5 Things To Know When Inspecting Exterior Paint Work in Denver Metro, CO
by dybvirtual | Mar 17, 2021 | Interior Painting
7 Tips For Painting Bathroom Cabinets in Denver Metro, CO
When you’re looking to make your bathroom look better, one area where you might want to look is the cabinets — after all, they’re the right thing for storing your bathroom needs and supplies, and if they don’t look good your whole bathroom suffers.
You may not realize it, but you don’t have to replace your bathroom cabinets if you don’t like their look — though there are some instances in which this is the best route (notably, when the cabinets are more or less falling apart and just need to be replaced.)
Painting your cabinets is a good alternative to replacing them when possible, and you might even end up with cabinets that look significantly better than before.
Let’s look at seven tips for painting bathroom cabinets in Denver Metro, CO.
1. Having The Right Kind Of Paint
You might be already aware that when you are painting an interior surface, there’s going to be a different paint that you’re going to use than if you were to paint an exterior surface.
That being the case, there are actually interior paints that are more appropriate for some rooms than others — and for painting your bathroom cabinets, a paint that is mold and mildew resistant is best.
This is because of the higher amount of moisture that can be found in a bathroom at any given point in time.
2. Choosing An Appropriate Color
You of course would want to make sure that you are going to have the right color for your bathroom cabinets, but how can you be sure that you’ve chosen a good color other than painting and then seeing how it looks?
A way for you to achieve this best is to get some small samples of paint and to paint a little bit of the cabinets — and to allow it to dry, of course.
This way, you can see how the color will look on the cabinets — and not just at that moment but you can check back at different times of the day in a variety of lighting conditions.
3. Wait For Dry Surfaces
In the process of painting just about anything, you aren’t going to want to paint or do really anything over top wet surfaces — for this will be bad for the end painting result.
The best thing that you can do is to make sure to wait for surfaces to dry before moving on to the next step.
4. Do Not Paint Too Quickly
As long as a painting project can be, you might be tempted to try painting more quickly — this would be a mistake, however, and to do this would likely cause the painting project to ultimately take longer.
This is because you are likely to make more mistakes when you paint more quickly — and these mistakes would then have to be corrected.
5. Ventilation Is Key
In just about any painting project, you’re going to have to have good ventilation.
This is also the case when you are painting your bathroom cabinets, and could come in the form of having the windows open to get some fresh air in as well as get the fumes from the paint out, and having the door or doors open as well.
6. Clean Before Painting
Before you start the painting process, you should take the time to clean the area near where you are going to paint as well as to clean the cabinets themselves.
This is because a well cleaned surface is better painted than one that is dirty.
7. Smooth Surfaces Are Necessary
Lastly, you should be aware that if you want your bathroom cabinet paint job to go smoothly… you’re going to need to have a smooth surface.
There are a number of ways to ensure a smooth surface — sanding, for example, and also using primer prior to applying the first coat of paint.
Don’t settle for just any painter when you can get the attention to detail and professionalism from Imhoff Fine Residential Painting in Denver Metro, CO. Call us today to speak with one of our professional color consultants.
Related: 7 Colors To Paint Your Stucco Exterior in Denver Metro, CO
7 Exterior Paint Problems And How To Fix Them in Denver Metro, CO
5 Things To Know When Inspecting Exterior Paint Work in Denver Metro, CO
by dybvirtual | Mar 13, 2021 | Exterior Home Painting
5 Environmentally Friendly Curb Appeal Improvements in Denver Metro, CO
When you’re looking to improve the look of the exterior of your home, you might think about things like the overall curb appeal, and what that means — the way that a person is going to perceive your home from the distance of the curb.
One element that some people don’t think about when they are working on improving their curb appeal is the impact that they are going to have on the environment — but there are ways that you can boost your curb appeal while being friendly to the environment.
With that being the case, let’s look at and consider five environmentally friendly curb appeal improvements in Denver Metro, CO.
1. Better Lighting For Your Porch
The porch is a place where people tend to like to spend time and if you are looking to boost your curb appeal while having the environment in mind, you’re going to want to consider replacing the light bulbs that you have on your porch, and possibly even the whole lighting system.
The thing about older lighting systems is that they tend to use a lot more electricity than newer systems, and with light bulbs you are looking at basically the same thing — bulbs that are newer tend to last longer and use less electricity as well — and sometimes can even still be just as bright or even brighter!
2. Walkway Made From Recycled Or Reused Materials
If you don’t have a walkway, you can take this opportunity to get a walkway leading to one of your doors that is not only attractive but also made of materials that previously served another purpose.
There are people who will take broken pieces of clay pots (meant for exterior gardening, that is) and will turn that shattered clay into pieces of their walkway.
By doing this you are not only boosting your curb appeal, you are doing so in an environmentally friendly manner.
3. Trimming The Trees
One of the more simple ways that you can boost your curb appeal while at the same time being friendly to the environment is to trim your trees.
Believe it or not, your trees do require periodic trimming, and if there is one thing that is not so pleasant to look at it is trees that are allowed to be unkempt — it is pretty quick for people to look at such a house and think that there’s something wrong with it based on just the appearance of the trees.
4. Cleaning The Roof
Another thing that you can do to boost your curb appeal is to clean your roof — and this is not only healthy as far as improving your curb appeal, it also will help the overall health of your home.
It is said that if you have certain accumulations on your roof, it’s entirely possible that over time those accumulations will eat away at your roof (depending on what kind of materials they are that have accumulated on the roof) and then allow rainwater and snow to drip directly into your home!
Better to make it a habit to either clean or have someone clean your roof so that you don’t encounter such problems.
5. Food Instead Of Lawn
Lastly, think about the possibility that instead of having a purely grass driven lawn, you make some plots of land available for growing things like fruits and vegetables.
For doing this is not only good in terms of the aesthetics, but it is also really good for the environment — if you think about it, growing grass is one of the most inefficient ways that you can make use of a plot of land.
True, grass does have its uses but food has even more uses and can be quite good as it provides food and looks nice at the same time.
Don’t settle for just any painter when you can get the attention to detail and professionalism from Imhoff Fine Residential Painting in Denver Metro, CO. Call us today to speak with one of our professional color consultants.
Related: 7 Colors To Paint Your Stucco Exterior in Denver Metro, CO
7 Exterior Paint Problems And How To Fix Them in Denver Metro, CO
5 Things To Know When Inspecting Exterior Paint Work in Denver Metro, CO
